2/14/11

The Plan -- raised beds

Our " back yard" is really the stuff they dug out to build the foundation in 1909, plus whatever fill was needed to complete the job. Over the years the soil (and I use that word loosely) had accumulated paint, glass shards, drug paraphernalia and who knows what else. As I dug out a woody shrub-weed near the foundation I cut through a thick multi-colored layer of clay. I'm guessing that purple soil is not what you want for a veggie garden, so raised beds were downright mandatory for this project.

The original plan we came up with involved an elaborate layout of wooden raised beds. Because we're going to put in a  patio with a pergola eventually, we were going to curve these beds around the back of the yard - which is about 30' deep and 18' wide. I drew a sketch to scale and everything.

Every gardening reference out there we saw strongly warned us away from using pressure-treated lumber, so we actually thought about making these beds with brick or concrete at first. If you're interested in going this route, check out the BBC's suggestions for creating your own curved surfaces. We almost did this until we realized it'd be too late in the season before it was warm enough to get the concrete to behave outside. Also, it looked kinda hard.

Plan B was wood. But again, the pressure-treated problem. The Gardener's A-Z Guide had  a quick fix there: it cites a USDA make-your-own wood preservative that's supposed to last up to 20 years, minus the toxicity. The recipe is 1 oz paraffin wax; 3 cups of exterior varnish or 1 1/2 linseed oil; and enough solvent - either paint thinner, turpentine, or mineral spirits -- to make the whole thing a gallon. Melt the wax in a double-boiler, then add the solvent, the varnish/linseed oil, and stir away. Then apply the mixture to your wood in a heavy coat.

We were good to go with that plan, even though it took forever to find the paraffin in Michael's (it's in bricks in the candle making section. People make their own decorative candles apparently). We happened to be in a suburban Home Depot (as opposed to the closest one to us in Brentwood; this one we call the "sniper Home Depot because of this) and stumbled upon a pallet of prefab, plastic, wood-simulating raised bed kits that were half off. At $60ish bucks, they were more or less a push versus the cost of the wood, hardware, and the above preservative mixture. Score. More on these guys later this weekend when we put them together before our dirt comes on Monday.

No comments:

Post a Comment